COA Certified · Every Batch Tested Same-Day Shipping on Orders by 2PM EST USA Sourced · USA Shipped Free Shipping on Orders Over $300 ≥99% Purity — HPLC + Mass Spec Endotoxin Tested · Sterility Verified COA Certified · Every Batch Tested Same-Day Shipping on Orders by 2PM EST USA Sourced · USA Shipped Free Shipping on Orders Over $300 ≥99% Purity — HPLC + Mass Spec Endotoxin Tested · Sterility Verified
For Laboratory & Research Use Only — Not for Human or Veterinary Use
All Products GLP-1 & Metabolic Research Peptides Peptide Blends Liquid Sprays Dissolving Strips Bioregulators Research Bundles Lab Supplies Merch Search

VIP

Third-Party Tested · COA Available
VIP (vasoactive intestinal peptide) is a lyophilized 28-amino-acid neuropeptide supplied by Synex Bio Labs for in-vitro and laboratory research. Each lot is supplied with [batch-specific HPLC and mass spectrometry documentation]. For research use only. Not for human or veterinary use.
DOSAGE
$120.00 / 5 MG · USD
SKU
The Purity Guarantee Verified ≥99% by HPLC & mass spectrometry, third-party tested, with a lot-matched Certificate of Analysis on every vial.
  • Certificate of Analysis available for every lot
  • ≥99% purity, HPLC & mass-spec verified
  • Ships from a U.S. facility — same-day before 12pm CT
  • Secure checkout · Free shipping on orders $300+

VIP (Vasoactive Intestinal Peptide) Research Peptide

For research use only. Not for human or veterinary consumption. Not a drug, supplement, or food.

VIP, short for vasoactive intestinal peptide, is a 28-amino-acid neuropeptide that is widely studied in neuroscience, endocrinology, and receptor-signaling research. Synex Bio Labs supplies VIP as a lyophilized research peptide for in-vitro and laboratory use, with documentation so that researchers can verify identity and purity before starting work. This page explains what VIP is, how it is studied, what quality documentation to expect, and how to handle the material.

What Is VIP?

VIP is a linear peptide with the sequence His-Ser-Asp-Ala-Val-Phe-Thr-Asp-Asn-Tyr-Thr-Arg-Leu-Arg-Lys-Gln-Met-Ala-Val-Lys-Lys-Tyr-Leu-Asn-Ser-Ile-Leu-Asn-NH2, with an amidated C-terminus. Its molecular weight is approximately 3,326 daltons [confirm from your COA]. It was first isolated from the intestine, and it is now known to be produced in many tissues, including the nervous system.

VIP belongs to a peptide family that includes PACAP, secretin, and glucagon. It acts mainly through two G-protein-coupled receptors, VPAC1 and VPAC2, and it can also interact weakly with the PAC1 receptor. Published literature is extensive and searchable on PubMed, and compound data is available on PubChem.

You may also see the synthetic version of VIP referred to as aviptadil in clinical-trial records. The VIP offered by Synex Bio Labs is sold strictly as a laboratory research material, and nothing on this page is a claim about effects in people.

Why Researchers Study VIP

VIP signals through receptors found in many tissues, which makes it a useful tool compound in several fields. In preclinical research, laboratories use VIP to examine:

  • Receptor pharmacology: comparing VPAC1 and VPAC2 activation and selectivity in cell-based assays
  • Second-messenger signaling: measuring cAMP production and related downstream pathways
  • Neuroscience models: studying neuropeptide signaling, including circadian-clock research in the hypothalamus
  • Immune and cell-culture models: examining how neuropeptides interact with immune cell signaling in vitro
  • Smooth muscle and tissue-bath studies: testing relaxation responses in isolated tissue preparations
  • Peptide-family comparisons: testing VIP alongside PACAP and related ligands to map receptor preferences

Because VIP has a short half-life in biological systems, researchers also use it as a reference when evaluating longer-acting analogs.

Product Specifications

Specification Detail
Product name VIP (vasoactive intestinal peptide)
Class 28-amino-acid neuropeptide, VPAC receptor agonist
Sequence HSDAVFTDNYTRLRKQMAVKKYLNSILN-NH2
Molecular weight ~3,326 Da [confirm from your COA]
Format Lyophilized (freeze-dried) powder
Vial size [e.g., 5 mg / 10 mg, confirm]
Purity (HPLC) [state only your real figure from the COA]
Salt form [e.g., acetate, confirm from COA]
Identity confirmation [Mass spectrometry, confirm]
Storage Store cold (freezer), dry, and protected from light [confirm against your COA]
Intended use In-vitro and laboratory research only

Quality and Documentation

VIP is a mid-sized peptide, and its sequence creates specific quality risks. It contains a methionine residue that is prone to oxidation, and several asparagine and glutamine residues that can undergo deamidation, which shifts the mass by about one dalton. It has a strong tendency to stick to plastic and glass surfaces, and it can aggregate in solution. Any of these can reduce the amount of active peptide or change receptor activity, and a single purity figure will not reveal them. That is why VIP should come with documentation that shows identity as well as purity.

Synex Bio Labs supplies each lot of VIP with [a certificate of analysis. Describe your real process here, e.g., each lot is tested by an independent laboratory and the report is linked on this page]. A credible VIP COA should include:

  1. Named testing laboratory and a way to contact it
  2. Batch-specific lot number that matches your vial
  3. HPLC chromatogram showing the full trace, not just a percentage
  4. Mass spectrometry data confirming a mass close to the theoretical value of about 3,326 daltons
  5. Salt form and, where available, net peptide content
  6. Test date and storage recommendations

HPLC tells you how pure the sample is, and mass spectrometry tells you whether it is the right molecule. You need both. Our guide on how to read a peptide COA (replace URL) explains what to look for, and you can use it to audit any VIP report you receive, from us or from any other supplier.

Understanding Purity Figures

A purity percentage from HPLC reflects relative peak area at a single detection wavelength. It does not equal the share of the vial’s mass that is peptide, because water and counter-ions make up part of the powder. If your experiment depends on exact concentrations, as receptor assays usually do, ask for net peptide content and base your calculations on it rather than on the stated vial weight. This applies to VIP as it does to every lyophilized peptide.

Storage and Handling

VIP needs more careful handling than a short, stable peptide.

  • Before opening: store the sealed vial cold and dry, protected from light, following the instructions on your label and COA. Many labs keep lyophilized peptides of this type in a freezer.
  • On arrival: record the date received, the lot number, and the condition of the package.
  • After reconstitution: use sterile technique, avoid repeated freeze-thaw cycles, and consider dividing the stock into single-use aliquots. Record the solvent, date, and storage conditions in your laboratory notebook.
  • Surface adsorption: VIP can stick to standard plastics, so many researchers use low-binding tubes and tips, and some add a carrier protein or low-concentration detergent to dilute solutions, depending on the assay.
  • Oxidation: limit exposure to air, light, and heat, since the methionine residue is sensitive to oxidation.

Treating handling as part of quality control protects the material you paid to have tested.

Why Source VIP From Synex Bio Labs

Researchers choosing a supplier for VIP should compare documentation, not marketing. At Synex Bio Labs we aim to provide:

  • Lot-specific documentation rather than generic reports
  • Clear research-use-only labeling on every product
  • Straightforward answers to technical questions about your lot
  • Careful packaging and shipping to protect lyophilized material in transit [edit to match your real practice]

If you are comparing suppliers, our peptide NCE supply guide (replace URL) walks through a complete vetting process.

Regulatory and Responsible Use Notice

This product is sold for in-vitro and laboratory research only. It is not intended for human or veterinary use, or for the diagnosis, treatment, or prevention of any condition, and it must not be used as a drug, food, or supplement. Regulatory status for VIP and its synthetic form, aviptadil, varies by country, and this product is not a pharmaceutical. By purchasing, you confirm that you are a qualified researcher or represent a research institution and that you will handle the material in line with applicable laws and your institution’s policies. Regulations change over time, so confirm current requirements for your region before ordering.

Frequently Asked Questions

What is VIP? VIP is vasoactive intestinal peptide, a 28-amino-acid neuropeptide that acts on the VPAC1 and VPAC2 receptors. It is widely used in neuroscience and receptor-signaling research.

Is VIP the same as aviptadil? Aviptadil is the name used for the synthetic form of VIP in clinical-trial records. The VIP sold by Synex Bio Labs is a laboratory research material and is not a pharmaceutical product.

Is VIP approved for human use? Synex Bio Labs does not sell VIP for human use. It is supplied for laboratory research only and is not a medicine, supplement, or food.

What is the sequence and molecular weight of VIP? The sequence is HSDAVFTDNYTRLRKQMAVKKYLNSILN-NH2, and the molecular weight is approximately 3,326 daltons. [Confirm against your COA.]

Why does VIP need special handling? It contains an oxidation-prone methionine, it can stick to plastic surfaces, and it can aggregate in solution. Aliquoting, low-binding labware, and cold storage help protect it.

What format does the VIP research peptide come in? It is supplied as a lyophilized powder in a sealed vial. [Confirm vial size and fill.]

Does VIP come with a certificate of analysis? [Yes, each lot ships with / links to a COA. State your real process.] The report should include HPLC and mass spectrometry data matched to your lot number.

Related Research Materials

External references: PubMed: vasoactive intestinal peptide, PubChem, ClinicalTrials.gov: aviptadil

All products are sold for in-vitro and laboratory research only. Not for human or veterinary use.

Answers

Frequently Asked Questions

Is VIP third-party tested?

Yes. Every lot is independently third-party tested for identity and purity — ≥99% by HPLC and mass spectrometry — with a lot-matched Certificate of Analysis available to download on this page.

Can I see the Certificate of Analysis before buying?

Yes. A lot-matched COA is available on this product page and in our COA library before purchase, documenting identity, purity, and full analytical results.

What does 'Research Use Only' mean?

This product is supplied strictly for laboratory and research use only (RUO). It is not a drug, food, supplement, or cosmetic, is not approved by the FDA, and is not intended to diagnose, treat, cure, or prevent any disease, or for human or veterinary consumption.

How is it shipped and stored?

Orders placed before 12pm CT typically ship the same business day from our U.S. facility with tracking. Store the lyophilized material at -20°C, protected from light and moisture.

More from this category

Research Peptides

← Back to Research Peptides All Categories